Sporicidin® Disinfectant Products (Solution, Spray and
Wipes) are FDA, EPA and OSHA compliant. They are recommended for use in homes,
offices, hospitals, medical, dental and veterinary clinics, pet areas,
pharmaceutical and industrial clean rooms, laboratories, nursing homes, schools,
hotels, dormitories, buses, trains, airplanes, trucks, automobiles, morgues,
lockers, athletic facilities, beauty and tanning salons, massage facilities and
public toilets.
Sporicidin® Disinfectant Products are broad-spectrum disinfectants that provide
100% kill of disease and odor-causing organisms on hard, non-porous surfaces.
They cleanse, disinfect and deodorize and prevent mold and mildew growth. They
are recommended for use on floors, walls and ceilings in areas damaged by water,
smoke and sewage. Sporicidin® is fungicidal and effective against Stachybotrys
chartarum (black mold), Chaetomium globosum and Aspergillus niger.
Sporicidin® Disinfectant Solution is approved for cleaning air ducts and
decontaminating carpets. Sporicidin® can be used to clean and disinfect
biohazards at trauma and crime scenes where blood and bodily fluids are found.
Sporicidin® is EPA registered to provide up to six months of continuous residual
bacteriostatic activity after it is applied to surfaces.
Directions for Use:
Surfaces and objects should be pre-cleaned to remove debris. Pre-cleaning can be
accomplished by first applying Sporicidin® Disinfectant Solution or Sporicidin®
Enzymatic Cleaner. Then apply Sporicidin® Disinfectant Solution and allow to
remain for 10 minutes for 100% kill of vegetative organisms. Sporicidin® can be
applied by sponge, mop, cloth, pressure sprayer, fogging device, portable
sprayer, portable or truckmounted carpet cleaning machine.
It is a violation of U.S. Federal Law to use this product in a manner
inconsistent with its labeling.
Do not dilute prior to use. Do not mix with any other chemicals.
Mold Remediation / Indoor Air Quality (IAQ):
Sporicidin® Disinfectant Solution is an EPA registered fungicide that cleans,
disinfects and deodorizes. It provides continuous residual bacteriostatic
activity for 6 months after application.
Clean, Disinfect and Deodorize: Pre-clean contaminated area with Sporicidin
Disinfectant Solution or Sporicidin Enzymatic Cleaner to remove excess
vegetative growth, filth or contaminates. Thoroughly wet pre-cleaned area with
Sporicidin® Disinfectant Solution and allow surfaces to remain wet for ten
minutes. Sporicidin® can be applied by hand sprayer, sponge, mop, cloth,
pressure sprayer, fogging device, portable sprayer, portable or truckmounted
carpet cleaning machine.
Dust and Spore Suppression Applications: Use Sporicidin® Disinfectant Solution
to effectively knockdown and suppress airborne dust particles and spores within
containment areas prior to final clearance inspection and testing during mold
mitigation. Mist Sporicidin® Disinfectant Solution into the air within the
containment area using a trigger sprayer, pressure sprayer or fogging device in
accordance with device manufacturer instructions. Refer to applicable fogging or
misting guideline section below for more information. Allow mist or vapor to
settle onto surfaces and remain wet for ten minutes. Thoroughly clean and wipe
all hard, non-porous surfaces with Sporicidin® Disinfectant Solution using clean
cloth, sponge or mop (Sporicidin® Disinfectant Towelettes [Wipes] are ideal when
working in containment areas). Allow surfaces to air dry.
Fogging: Sporicidin® Disinfectant Solution is recommended for fogging surfaces
and articles in sealed rooms adjunct to manual cleaning and disinfecting. Vacate
the area to be fogged. Seal windows, doors, air intakes and ducts. Fill fogging
device with Sporicidin® and set timer for treatment cycle as recommended by
manufacturer. Turn on the device, leave the room area and seal the door. Enter
the area after it has been properly ventilated.
Misting Applications: Misting treatments may be applied using a pressure
sprayer, trigger sprayer or an electric fogging device and Sporicidin®
Disinfectant Solution. Seal all doors, windows and intake ducts or vents. Vacate
the area to be treated. Personnel remaining in the contained area should wear
personal protective equipment (PPE) during the misting application in accordance
with OSHA Respiratory Protection Standards (see Respiratory Protection notice
below). Fill misting device with Sporicidin® Disinfectant Solution and adjust
device output to desired settings. Mist disinfectant into air and onto articles
and/or surfaces allow remaining wet for 10 minutes. Vacate room and reseal door.
Treated area should remain sealed for 15 to 30 minutes after the misting
application is complete. Ventilate treated area prior to commencing normal
cleaning procedures. Follow regular Sporicidin® cleaning and disinfecting
procedures upon returning to the treated area.
Water / Flood Damage:
Remove excess floodwater and foreign matter. Pre-clean contaminated surfaces
with Sporicidin® Disinfectant Solution using mop, cloth, sponge or pressure
sprayer. Wipe dry. After final cleaning, reapply Sporicidin® Disinfectant
Solution to affected areas and allow to remain for 10 minutes. Sporicidin®
Disinfectant Solution provides 100% kill of disease and odor-causing organisms
and provides up to 6 months continuous, residual bacteriostatic protection when
applied to pre-cleaned hard, non-porous surfaces.
Air Ducts/HVAC Systems:
Deodorize HVAC System: Sporicidin® Disinfectant Solution is recommended as an
effective deodorizer to eliminate stale or musty odors in HVAC systems. Vacate
area and fog or spray Sporicidin® into HVAC system intakes while the system fan
is operating and allow enough spray time to allow Sporicidin® to contact
internal HVAC air duct surfaces. Repeat application as needed.
Air Duct Cleaning: Sporicidin® Disinfectant Solution is EPA registered for use
on hard duct surfaces. Not intended for use in fiberglass duct board, unlined
flex ducts or other porous duct surfaces.
Prior to treatment, thoroughly inspect air duct system and complete any needed
repairs. Mechanically clean air ducts in accordance with industry guidelines to
remove gross filth and contaminants. Vacate area to be fogged. Fog into
pre-cleaned ventilation duct system and allow Sporicidin® to air dry; do not
rinse.
Cleaning and Disinfecting Evaporator Coils and Drip Pans: Sporicidin® may be
used to clean and disinfect HVAC evaporator coils and condensation drip pans and
prevent odors by reducing microbial and fungal growth. To clean coils: Turn HVAC
system off. Pre-clean coils with Sporicidin® to remove debris. Then saturate
coils with Sporicidin® and allow to remain wet for ten minutes. Allow to air
dry. To clean drip pans: Empty any standing condensation from drip pan.
Pre-clean drip pan with Sporicidin® and wipe surfaces dry. Saturate cleaned pan
surfaces with Sporicidin®, allow to remain wet for ten minutes and air dry.
Sewage Backflow:
Remove foreign matter prior to cleaning and disinfecting. Saturate contaminated
surfaces with Sporicidin® Disinfectant Solution with a mop, cloth, sponge or
pressure sprayer to pre-clean. Wipe dry. After pre-cleaning, reapply Sporicidin®
Disinfectant Solution to affected areas and allow to remain for 10 minutes.
Sporicidin® Disinfectant Solution provides 100% kill of disease and odor
-causing organisms and provides up to 6 months continuous, residual
bacteriostatic protection when applied to pre-cleaned hard, non-porous surfaces.
Trauma Scene Cleanup:
Sporicidin® Disinfectant Solution complies with OSHA bloodborne pathogens
standard and can be used effectively to remove bodily fluids present at crime
scenes. Refer to Sporicidin® Bulletin No's. 303 & 403 for additional
instructions.
Carpet Cleaning:
Cleans: Sporicidin® Disinfectant Solution contains an effective combination of
surfactants which break down and remove soils and stains commonly found in
carpets. When used as part of a carpet maintenance program, Sporicidin® helps
carpets last longer.
Decontaminates: Sporicidin® Disinfectant Solution removes
and limits the growth of new organisms. Deodorizes: Sporicidin® Disinfectant
Solution kills the organisms that cause odors.
Pre-test for colorfastness by applying Sporicidin® to an inconspicuous area and
rubbing with a clean white cloth. If the color changes or transfers to the
cloth, a water-based cleaning method should not be used.
Pre-Spray Method: Sporicidin® Disinfectant Solution can be applied to carpets
using a pressure sprayer. Wet carpet with Sporicidin® Disinfectant Solution and
brush or roll into carpet nap. Allow carpets to remain damp for 10 minutes
before extracting. Sporicidin® Disinfectant Solution is pre-mixed and ready to
use.
Portable/Truckmount Method: Add Sporicidin® Disinfectant Solution to tank or
bottle. Pre-treat heavily soiled or contaminated areas prior to final cleaning
and extraction. After extraction, set carpet pile in one direction with carpet
rake or brush and raise furniture legs until dry. Air movers may be used to
speed the drying process. Sporicidin® Disinfectant Solution is pre-mixed and
ready to use.
Equipment Disinfection:
Personal Protective Equipment (PPE): Sporicidin® Disinfectant Solution and Towelettes (Wipes) can be used to clean, disinfect and deodorize Personal
Protective Equipment (PPE). They are non-corrosive to plastics, latex, vinyl,
glass, wood, metal and porcelain. Sporicidin® is non-staining, non-flammable and
non-abrasive. It is recommended on such items as respirators, breathing
apparatus, goggles, hard hats, hearing protectors, gloves, aprons and boots.
Clean contaminated surfaces with Sporicidin® and allow to air dry. Follow
manufacturer?s recommended directions for cleaning and decontaminating personal
protective equipment.
Restoration Equipment: Use Sporicidin® Disinfectant Solution or Towelettes to
effectively clean, disinfect and deodorize restoration equipment after use for
mold remediation, trauma scene cleaning, water/flood damage restoration or
sewage clean up.
Unplug equipment from power source. Clean exterior and accessible interior
surfaces with Sporicidin® Disinfectant Solution or Sporicidin® Disinfectant
Towelettes (Wipes). Surfaces should remain wet for 10 minutes and allow to air
dry. Thoroughly clean reusable filters or strainers with Sporicidin®
Disinfectant Solution and allow to remain for 10 minutes for 100% kill of
vegetative disease-causing organisms. To deodorize and decontaminate waste
recovery tanks and reservoirs: Remove gross contaminates and sediment from tank.
Thoroughly clean interior surfaces with Sporicidin® Disinfectant Solution and
air dry. To clean and deodorize extraction hoses and wands: Attach hose and wand
to extractor/truck mount. Turn unit on to create vacuum source. Spray
Sporicidin® Disinfectant Solution into wand/hose opening for several minutes to
thoroughly coat interior surfaces. Turn unit off. Clean exterior of disinfected
wand and apply with Sporicidin® before storing.
Veterinary and Other Animal Facilities:
Sporicidin® Disinfectant Solution cleans, disinfects and deodorizes (kills the
organisms that cause odors) in animal areas, such as kennels, cages, stables,
portable carriers, vehicles, trailers and on instruments.
Vacate the area and pre-clean surfaces with Sporicidin® Disinfectant Solution or
Sporicidin® Enzymatic Cleaner to remove excess debris prior to disinfecting. To
disinfect, wet surfaces with Sporicidin® Disinfectant Solution and allow to
remain for 10 minutes, allow to air dry before returning animals.
Fogging Articles and Surfaces in Sealed Clean Rooms
and Cubicles:
Sporicidin® Disinfectant Solution is recommended for fogging articles and
surfaces in sealed clean rooms and cubicles as an adjunct to manual cleaning.
Vacate the area to be fogged. Seal all windows, doors, air intakes and ducts.
Fill fogging device with Sporicidin® and set timer for treatment cycle as
recommended by device manufacturer and turn on device. Leave room and reseal
door for 2 hours after fogging cycle has completed. Ventilate room or cubicle.
Refer to Sporicidin® Bulletin No. #301 for additional information.
STORAGE AND DISPOSAL:
Store at room temperature. Dispose of container in regular trash.
* RESPIRATORY PROTECTION:
In accordance with OSHA regulations (29 CFR 1910.134 and 29 CFR 1910.1000),
fogging or spraying applications may require the use of respiratory protection
during and after treatment to protect workers from chemical hazards.
