Mr. Clean IAQ - Indoor Air Quality

Mr. Clean IAQ offers germicidal UV equipment for any facility - from small residential UV disinfection systems to large commercial / industrial projects.
The complete line of UV equipment includes direct and indirect UV air cleaners, UV surface sterilizers, ultraviolet water disinfection systems and UV lamps. Additional products for cleaner and healthier indoor environment are also available and include Sporicidin Disinfectant Solution, Enzyme Mold Cleaner, Sprayers and Foggers.

Residential UV Air Cleaner - American-Lights® High Output UV Air Cleaner
American-Lights® Residential / Light Commercial UV Air Cleaner The American-Lights® UV Air Cleaner is installed by a qualified contractor inside the air duct of home or office HVAC systems and covers up to 5,000 square feet. By treating the air which passes through the HVAC systems with ultraviolet light, American-Lights® UV Air Cleaner effectively reduces or eliminates the DNA-based airborne contaminants - bacteria, viruses, mold and spores - that cause allergy, asthma attacks, sickness and other respiratory conditions. Ultraviolet light air cleaners have been used for decades. They have been tested and implemented by companies such as General Electric and Westinghouse. The UV light air cleaners are used in hospitals, laboratories, clean rooms, doctors' offices, commercial buildings, food processing plants - any place a concern for clean air exists. With American-Lights® UV Air Cleaner this exceptional technology is available to the homeowners also.	American-Lights® UV Air Cleaner Benefits: By reducing or eliminating* airborne mold, mold spores, viruses and bacteria from the indoor air, the American-Lights® UV Air Cleaner can help: Fight sickness such as common cold, influenza, measles, small pox and tuberculosis Reduce allergy and asthma Reduce frequent headaches Reduce constant snoring Reduce nasal congestion Reduce irritability Increase personal energy Reduce fatigue and depression Fight the Sick Building Syndrome ____________ * Based on exposure time and UV intensity. The American-Lights® High Output Germicidal UV Lamp is similar in design to a normal fluorescent lamp. It is a 4-pin ceramic base lamp with Teflon wiring. It is constructed of type “L”, hard glass quartz which eliminates ozone production. Heat output is low, allowing the UV lamp to be installed safely in several different locations within the HVAC system. Effective lamp life is approximately one year. The UV lamp continues to glow after that but the UV output deteriorates.
HVAC Cooling Coil & In-Duct UV Air Cleaners and Surface Disinfection Systems
HVAC In-duct UV Air Cleaners & Coil Disinfection Systems: UV Air Cleaners And Ultraviolet Coil Disinfection Systems In-Duct UV Air Purifiers for HVAC Systems - 4 UV Lamps CC Series High-Output UV systems are designed specifically for UV disinfection of cooling coils in HVAC applications. The UV systems can be mounted in various configurations to irradiate cooling coils and drain pans and for optimum air decontamination. Individual UV fixtures can be mounted to plenum walls or multiple fixtures can mount to frame assemblies that span supply ducts or cooling coils. This type of UV systems has been incorporated in the UV Facilities Standards for the Public Buildings by the U.S. General Services Administration Office of the Chief Architect. Applications: Coil Clean (CC) Series UV fixtures are ideal for internal installation in medium to large HVAC systems in commercial, industrial, health care and institutional buildings. They are an excellent choice for mounting close to the coil and drain pan areas to continuously disinfect them with germicidal UV and inhibit the growth of mold and mildew in these areas. Water-tight lamp connection The CC UV Systems are moisture proof and are offered in single and double lamp configurations. They can be mounted individually or in built-up banks, or in parallel rack-system configurations in a variety of locations, including coils, drain pans, ductwork, mixed air plenums and exhaust systems. The CC fixtures are available in 18”, 24”, 36”, 48” and 60” lengths and 115, 208, 230 or 277VAC voltage options, providing installation flexibility to accommodate virtually any HVAC system. The CC fixtures are designed for moisture-proof applications with UVC lamps that incorporate a built-in outer quartz sleeve with protective boot on the power end for sealing purposes. Connect the fixtures to 1 power source Power is brought to the lamp with coated lead wires through a waterproof connector that is securely sealed to the lamp. The UV lamps are rated for two-year continuous operational life with approximately 20% drop in UVC output at end of lamp life. Features and Benefits of CC germicidal UV systems installation: Improves Indoor Air Quality (IAQ) by reducing bacteria, viruses, mold and spores that either grow or pass through the air handling systems. Reduces the risk of cold, flu, allergies and other illness associated with air handling systems < “Green” lamps contain =8mg of mercury Hardwire UV fixtures are also available Two-year (17,000 hours) guarantee on lamps with only 20% decrease in UV output over the two years Five-year, non-prorated warranty on the ballast Continuously cleans coils, drain pans, plenums and ducts - eliminating costly cleaning programs and the use of harmful chemicals and disinfectants Reduces HVAC energy costs by restoring heat transfer and net cooling capacity Produces no ozone or any other secondary contaminants Plug-in connections mean no field wiring required to connect fixture to fixture when building banks of rack systems	Eliminator UV Disinfection Systems for HVAC Installation NC UV Systems - NEMA Housing SPECIFICATIONS: Every CC UV System is manufactured and factory assembled in the USA and tested prior to shipment. Each UV fixture consists of housing, reflector, electronic ballast(s), lamp bracket, plug-in power connectors and high output UV lamp(s). FIXTURE: The housings of the UV systems are constructed of heavy gauge hospital grade stainless steel. Reflectors are fabricated from the highest grade bright annealed polished stainless steel, which has a reflectivity rate of 88% when exposed to short-wave UVC in the range of 254 nm. All components are in one integrated assembly to maximize serviceability. BALLAST: The solid-state electronic ballast (furnished with this series), is a Class P rapid start with a power factor minimum of .95. It is available for 120, 208, 230, or 277VAC 50/60Hz and is designed to maximize photon production in air temperatures of 35º to 175º F. Minimum ballast start temperature is minus 20º F. Ballasts have an RFI - EMI rating as defined by FCC part 18A for industrial / commercial applications in regards to suppression. Ballasts are UL listed and suitable for use in air handling spaces. LAMPS: CC Series UVC lamps are high-output (800mA), T5 tube diameter, and constructed from hard glass tubing for superior UV transmittance. Lamps are “green”, containing =8mg of mercury (Hg) and they produce no ozone. Lamps shall retain, at minimum, 80% of initial output after 17,000 hours of use. They are sealed for moisture protection with a water-tight connection. Electrodes are designed to maximize plasma convection and stability for superior lamp performance. Lamps are rated to produce 11.7µW/cm² per linear inch of lamp arc length at 1m in airstreams of 400FPM velocities at temperatures of 45º F. INDEPENDENT TESTING: Units are tested in accordance with the general provisions of IES Lighting Handbook, 1981 Applications Volume, and provide output per 1" arc length of not less than 11.7µW/cm² at 1m in a 400FPM airstream of 45° F.

Let us help you find the best UV Air Cleaners, Surface Sterilizers, Water Purifiers or UV Lamps for your particular needs. We will be glad to provide any germicidal ultraviolet equipment specifications for any facility.

Home UV Air Cleaner - HVAC contractors should visit the technical specifications page of the American-Lights^® High Output Residential UV Air Cleaner. Homeowners can go to the American-Lights^® UV Air Cleaner designated website. The American-Lights^® UV Air Cleaner is installed by a certified HVAC contractor inside the air duct of home HVAC systems and covers up to 5,000 square feet. By treating the air which passes through residential HVAC systems with ultraviolet light, American-Lights^® UV Air Cleaner effectively reduces or eliminates airborne germs such as mold, bacteria, viruses, spores and fungi.

Commercial UV Air Cleaners include direct air cleaners and direct UV surface sterilizers, HVAC, or in-duct, mounted UV air cleaners and the portable UV air cleaners and air purifiers. The UV Air Cleaners are proven so effective that U. S. General Services Administration has incorporated them in the Public Buildings Standards as follows: "Ultraviolet light Air Cleaners shall be incorporated downstream of all cooling coils and above all drain pans to control airborne and surface microbial growth and transfer. Applied fixtures / lamps must be specifically manufactured for this purpose."

There are various types of lamps that artificially produce UV. There are UV lamps for tanning, for counterfeit money detection, blacklight stage lamps and lamps for mineral displays, lamps that produce Ozone and germicidal UV lamps. Mr. Clean IAQ's primary focus is the germicidal type UV lamps, which emit shortwave UV light in the ultraviolet section of the specter also known as UVC or germicidal UV. Many times people refer to the UV lamps as UV bulbs as in regular light bulb. Even though bulb is not the correct term, replacement bulb, UV bulb or bulbs are widely accepted in the industry as a reference to the UV lamps.

Sporicidin Disinfectant Solution is EPA registered as Avian (Bird) Flu Disinfectant and Methicillin Resistant Staphylococcus Aureus (MRSA) Disinfectant. » MRSA disinfectant » Avian (Bird) Flu Disinfectant

Sporicidin® Disinfectant Solution (towelettes, pump spray and solution) have 510(k) clearances. They are also registered by the Environmental Protection Agency as "hospital disinfectants". They were the first liquid germicides to receive FDA 510(k) clearances for disinfection of medical devices. Sporicidin infection control products are used by medical and dental professionals in hospitals, clinics, nursing homes, blood banks, dialysis centers and medical, dental and veterinary offices. They provide 100% kill of pathogenic and odor-causing organisms.

Sporicidin® is recommended for the following applications: mold remediation for commercial and residential buildings, HVAC air ducts cleaning, sewage cleanup, water and flood damage restoration, decontaminating and deodorizing carpet, upholstery, furniture, books and art - kills the microorganisms that cause odors, decontaminating respirators, personal protective equipment and restoration equipment, biohazard and crime scene cleanup, misting and dust suppression, disinfection of instruments, equipment and surfaces in hospitals, medical and dental offices and pharmaceutical clean rooms - Sporicidin® has been the medical disinfectant of choice since 1978.
Sporicidin® is non-corrosive and safe to use on wood, glass, tile, rubber, vinyl, plastics and metals.

Note: UV lamps contain mercury therefore must be properly disposed of as a hazardous waste in accordance with local, state and federal regulations or the lamps should be recycled. Please dispose of the used UV lamps properly or send them to American Air & Water and we will collect and send the lamps to a lamp recycling facility.